WARN 8274 the winch is 100 completely disassembled i took it all apart to inspect it, i have got all of the stock parts for it found no real damage just some surface rust. I have also got every part to rebuild it i ordered them i while back and i never got around to putting the winch together, i have never had power hooked to it
these are the parts i bought
DSI-Warn-68608 Motor, 4.5 Bosch, Mh (includes Item #'s 22,27,28,& 39)
DSI-WARN-15879 Motor Pinion Gear
DSI-WARN-8409 Brake Service Kit (includes 35, 36, 38-42, 44, 45, 48,
50)
DSI-WARN-8680 Lower Housing Service Kit (includes 26-28, 31)
DSI-WARN-8356 Bearing
DSI-WARN-8316 Armature, Bearing
DSI-WARN-7596 SEAL
i have got the stock cable and fair lead for it but i would replace it if i was going to use it b/c its a bit rough
600 as is with a set of pictures for you to reassemble
700 if i re assemble it
plus shipping
____________________________
4 16x8 aluminum Weld racing scorpio V wheels with the 8x6.5 lug pattern that will fit basically all 3/4 ton trucks except newer ford super dutys
center caps included
the previous owner had a very small crack professionally fixed by a tig welder, the wheel is still straight and will still balance, he ran the wheels on his cummins for 20k miles with no issues so as far as i am concerned there is no problem with this
250 firm plus shipping
_____________________________
brand new in the boxes set of 5 craiger soft 8 black steel wheels
15x8 with 5x5.5 bolt pattern
part number CRR-3975855
i paid 250 plus shipping for this set they are brand new never removed from the boxes never had tires mounted
will take 200 plus shipping
_____________________________
a set of 5 A to Z fabrication diy beadlocks brand new just got them last week, they are 32 bolt beadlocks and are made for a 15 inch rim
includes
5 inner weld on rings
5 outer bolt on rings
330 grade 8 washers
165 grade 8 nylon lock nuts
165 grade 8 bolts
they list for 340.90 plus shipping
my price is 340 SHIPPED TO YOU
http://www.atozfabrication.com/store...Lock-Kits.html________________________
i just bought these tires from a local guy 2 weeks ago, when i agreed to buy them they were still on his jeep so i know they hold air as he was driving on them. when i picked them up him and his buddy loaded them up in the truck as we were all there talking and i honestly did not even look at the tires
i took one of the tires to a tire shop locally and he would not mount them to a normal rim b/c he said they might leak air and he basically did not want to get involved, the previous owner had the tires mounted on beadlocks and i suspect that is the reason for the damage to the bead. or they were just alittle rough with then when they were remover from the rim.
i have been pm'ed by numerous people that have all told me that this is normal for mtr's to do this and that there is no problem with them and they will mount up and not leak at all, but i just wanted to be honest with any potential buyer
what i have is 4 37 inch old style mtr's with .51 - .53 inches of tread, i cant find exactly what these were when they were brand new but it looks like they have very very little road time on them
2 of them have issues with the beads (only on one side)
all 4 have some chunks from wheeling them but no patches and plugs
this is the worst one
the other bad one
would like to get
500 for the tires
340 for the beadlocks
or
if you buy both i will do 750
__________________________________
a pair of wheel spacers to convert from 5x4.5 to 5x5.5
1.5 inchs thick
50 bucks
____________________________
Jeep wagoneer front dana 44 this axle for all intense pourposes is brand new everything has been replaced the only original parts are the housing, knuckles, and shafts
-BOM 610247-1
disassembled cleaned original mounts removed, the driver side leaf pad has been removed from the center section for proper lower control arm placement the housing was heated and the tubes were welded to the center section
-TNT customs tj/xj truss welded on
-Ballistic fab coil/shock/trackbar/lower control arm mounts
- 2 sets of inner and outer stock shafts
- brand new spicer ball joints
- brand new DuraSolid chevy small bearing spindles
- brand new spindle bearing and seals and oil slinger
- brand new federal mogel inner and outer wheel bearings
- ford f-150 hubs (5x5.5)
-brand new rotors
-brand new wheel studs
- waggy caliper mounts
-brand new waggy calipers
-brand new wagner ceramic pads
-warn premium hubs
-original 6 lug hubs
-original waggy spindles
-original rotors
-brand new riddler diff cover
bolt this into your tj/lj/or xj with very minor modifications
i will gear this axle to whatever gear ratio the new owner would like you pay me for the axle and i will have it geared and then you can pick it up
price for the axle with new gears and an open carrier
1650
e-mail me for the specifics on this if your interested as well as adding a locker to the axle
tm_collins85@yahoo.com i will add more to this as i decided to sell
